Fax:0595-22497893

Address:Maiwei Science Tech Park Qingmeng Quanzhou Fujian China

E-mail:maiwei@maiwei.com.cn

Analog/Digital Low Power Repeater

Location:Home->Products->Products Detail
TDD-LTE Wide Band Pico Repeater (Intelligent)

TDD-LTE Wide Band Pico Repeater (Intelligent)

MN-L1800-XX-XX-XXI

MN-L2300-XX-XX-XXI

MN-L2600-XX-XX-XXI 

Features:

Designedwith low noise figure, great out-of-band rejection ability.

■Intelligent ALC technology and attenuation regulation, Gainfunction supports automatic detection, automatic test input signal power,automatic tracking for uplink gain Settings.

■ Highlinearity PA, maximum 70dB gain.

■ Lowpower consumption, compact size, easy for maintenance and installation.

■Automatic detection of transmitting antenna and receivingantenna isolation ratio, automatic control gain, self-excited protectionfunction, to solve the instability of base station interference equipment.

■ Allparameters can be adjusted automatically, automatic monitoring and processing.

■Uplink and Downlink time slot than adaptive function. Automaticsearch area has time slot than configuration, automatic configuration softwareto realize synchronous inside.

■ AluminumCabinet (IP30).

Product Description:

MN-XXXX-XX-XX-XX is a cost-effective solution for wireless enhancement.Repeater receives donor signal from air via donor antenna, after signalamplification, signal will transmit to target service areas. All parameters canbe adjusted automatically, automatic monitoring and automatic processing.

Electrical Specifications:

Items

Specifications

Reverse

Forward

Work Frequency Range (MHz)

LTE1800-F ,optional

MODEL1

1880-1920

LTE2300-A,optional

MODEL2

2320-2370

LTE2600-D,optional

MODEL3

2570-2620

Operating Bandwidth (MHz)

wide band

Max. Output Power (dBm) (Center frequency)

10~20±2,optional

10~20±2,optional

Max. Gain (dB) (Center frequency)

70±3

70±3

ALCdB

20

20

AGC (dB)

≤|±2.0|

≤|±2.0|

AGC Range (dB)

0 ~ 20

0 ~ 20

 Noise Figure (dB) (Max. gain)

≤6.0

≤6.0

Ripple In Band (dB)at 25

6.0

6.0

 VSWRPower up, Max Gain, Pin=-45dBm

≤1.8

≤1.8

 Time Delay (us)

≤1.5

≤1.5

Out of band Spurious Emission (dBm)

9KHz150KHz

≤-36/1KHz

≤-36/1KHz

150KHz30MHz

≤-36/10KHz

≤-36/10KHz

30MHz1GHz

≤-36/100KHz

≤-36/100KHz

1GHz12.75GHz

≤-30/1MHz

≤-30/1MHz

3rd Inter-modulation attenuation (dBc) (Max Gain)

≤-36/30KHz

≤-36/30KHz

Spectrum Emission Mask (Max. Gain)@TDD-LTE

0.05£ f_offset < 5.05MHz

-7~-14/100KHz

5.05 £ f_offset < 10.05MHz

-14 dBm /100KHz

10.5 £ f_offset <f_offset max

-15 dBm /1MHz

EVM(%)RMS

64QAM

≤8 %

≤8 %

Frequency error

≤0.05PPM

≤0.05PPM

Switching time Mask(us)

OFF to ON

≤17

≤17

ON to OFF

≤17

≤17

Synchronous range

≥30dB

Synchronization scheme

Level synchronization

Donor downlink signal powerdBm

RSRP-80dBm

Mechanical Specifications:

Items

Specifications

Impedance (Ω)

50

Radio Connector

SMA(f)

Power Supply

AC100~240V, 50Hz

Weight (Kg)

≤1.0

Power Consumption (W)

≤25

Dimension (mm)

157×127×21

Enclosure Protection Degree

IP30(indoor)

Operating Temperature ()

-5~ +45

Humidity (%)

95

Control Function

Intelligent, internal automatic control

Indicate Specifications:

synchronizing indicatorSY

Green light

synchronization

Green flashing

Not synchronized

light not bright

Equipment power failure or no electricity

Isolation indicator lampISO

Green light

Isolation is good

Green flashing

Isolation is not good

Red&green flashing

Isolation is Poor

Red flashing

Isolation is very poor

Red light

isolation is Super poor

light not bright

Isolation is too small, into the device protection status

Downlink output power indicatorPM

Green light

Pout is Poutmax±2dBm

Green flashing

Pout=Pmax-2Pmax-5)±2 dBm

Red&green flashing

Pout=Pmax-6Pmax-9)±2 dBm

Red flashing

Pout=Pmax-10Pmax-13)±2 dBm

Red light

Pout(Pmax-14dBm)±2dBm

light not bright

DL input is too large, access to equipment protection

Three lights flashing at the same time

This condition is automatically detected and adjusted after the device has been added to the device, and the 10s is completed.

protection function

When the module of the downlink input signal, beyond the control range of the module, turn off the link, in the next 15 seconds after the start of the three restart, if the input state is still not changed, then shut down, 24 hours after the resumption of testing.

Note1: the need to ensure that the "SY" & "ISO" indicator for "green light".

Note2:  Gpmax is Nominal gain, Pmax is Nominal output power